Forta Doors Single Door with No Sidelite and Surround Transom in a Oak Color

When your front entry door is getting worn out and old, it is time to replace it with a more energy-efficient, updated door. The new door will usually be pre-hung and in a frame so you don’t need to be an expert to get this home improvement project done. There are simple steps and techniques you can use to get this done quickly.

Aren’t sure if it is time to replace your front entry door. There are some simple signs that this project should be done. Is the wood deteriorating or rotting? Are the door joints loose? Does finish not stay on the exterior part of your door? Are the threshold and weather stripping old and worn out? Does your door have uninsulated glass? Do you need to update the style of your home? If you have answered yes to even just one of these questions, it is time to remove the front entry door and replace it with a new one.

A door weather seal is placed between the bottom of an exterior door to seal the gap between the door and the floor. The weather seal stops inside air from escaping into the outside, and air from outdoors coming inside, preventing uncomfortable conditions and increased energy consumption.

On average, weatherstripping lasts 3- 5 years, although some products last much longer and some much less. The type of weatherstripping selected and care of the product both affect the duration of time it’ll last. There’s also a plethora of things that may cause the weatherstripping to deteriorate or otherwise become damaged.  Pets and humans can both cause damage to weatherstripping, as can pests, the age of the material, improper care, and various weather conditions.

Deteriorating or damaged weatherstripping allows air to escape from the home and allows outside air to come inside. It also suffices as an entrance point for pests like ants, spiders, cockroaches, and bees who want nothing more than to make themselves right at home underneath your roof. Inspecting the door weather seal yearly is ideal. As you inspect the weatherstripping, look for signs of deterioration and damage, including:

• Weather seal that’s bent or otherwise lost shape
• Dry, brittle, or cracked weather seal
• Losing adhesive foam, or foam that has pulled away from its fixture
• Missing adhesive foam
• Missing nails

If damage is noted, don’t delay learning how to replace door weather seal with the step-by-step guide below. You’re letting heat and air escape your home, costing a considerable amount on your heating costs. Outside air and pests coming indoors create a big nuisance. Temperatures inside your home are likely uncomfortable. You’re suffering without merit, since a DIY weatherstrip replacement is a simple procedure that protects your home, comfort, and peace of mind. Expert door seal replacement isn’t necessary, as any homeowner can complete the task in a matter of hours with a few tools in-hand. Gather the items you’ll need and prepare for a day of DIY weatherstripping fun.

You may think of painting walls in different rooms of your home, arts and crafts but you may not have considered painting a metal front door. This type of door gets drilled by the sun every day and the metal may get very hot. Through time, the pain is going to start peeling off your door. In just a couple years after painting it, the door may look like a cracked egg all over. When others come to your home, they won’t be all too thrilled. Some people say that lighter paint is going to help with this.

However, if that isn’t something you want to do, you may need to try out different things before finally figuring it out. There are many paints and primers out there so you may need to mix and match until it is just right. The one thing to remember is that you should only pain when there is shade and not when the sun is fully out.